Stainless steels

Evaluation of bearing configurations using the single bearing tester in liquid nitrogen

T. Jett, P. Hall, and R. Thom.

External stress-corrosion cracking of a 1.22-m-diameter Type 316 stainless steel air valve

Thomas J. Moore, Jack Telesman, Allan S. Moore, Dereck F. Johnson and David E. Kuivinen.

Stress corrosion study of PH13-8Mo stainless steel using the slow strain rate technique

Pablo D. Torres.

Spectroscopic analysis of perfluoropolyether lubricant degradation during boundary lubrication

Pilar Herrera-Fierro, Bradley A. Shogrin, William R. Jones, Jr.

Surface chemistry, friction, and wear properties of untreated and laser-annealed surfaces of pulsed-laser-deposited WS₂ coatings

Kazuhisa Miyoshi and Donald R. Wheeler, Jeffrey S. Zabinski.

Cracking of coated materials under transient thermal stresses

by A.A. Rizk and F. Erdogan.

Scuffing characteristics of high-load rolling/sliding contacts operating in liquid oxygen: effects of materials and surface roughness : technical report for the research conducted under grant/contract no. NAG8-1134

submitted by L. Chang, [P.B. Hall, R. Thom].

Effects of space exposure on metals flown on the Long Duration Exposure Facility

H. Gary Pippin and R.J. Bourassa.

Final report to NASA Marshall Space Flight Center on the study of low temperature unbalanced magnetron deposition of hard, wear-resistant coatings for liquid-film bearing applications

Documentation of stainless steel lithium circuit test section design